Microwave Lab Oven, MW/Rf Dryer for Chemical Industries, RF Batch Dryer, Mumbai, India

Chemical Industry

In chemical Factory,drying of final product whether it is a dyestuff or an intermediate or final product complete drying is essential. Advantages of this drying is pollution free product, Product with no impurities, reduction in germ count .Any type of of product can be dried like alkalies, waxes carbonates , silicates etc. Different technological options are available depending upon requirements of clients like continuous conveyor dryer , hot air assisted dryer for Industries.

Applications in Chemical Industries :

Processes in the Chemical industry like Calcinations, Catalyzing, Curing, Drying, Heating, Conduction, Convection to dry, Incineration, Evaporation, Foaming, Expansion, Phase separation, Reacting, Melting, Sintering, Sterilization, Treatment of starch, Liquefying of high viscous chemical raw-material in 200kg barrel can be addressed with our Electromagnetic Heating and Drying units.

You can heat and treat several products/ materials including Polymers, Binders, Adhesive, Resins, Methyl , hloride, Bio medical waste, Inks, Foam, Vaseline, Sulphur, Clay, Alkalis, waxes, Germanium oxide, Cobalt carbonate, Powder silicon, Water mixtures of manganese oxide, Ceramic coloring material, Copper pyrophosphate, Lead & zinc concentrate, Silicates, Phosphates, Bacosol 3A, Pharmaceutics, Medicaments, Pesticides, Sodium lauryl sulphate, Pigments, Fermentation media, Peroxide / explosive materials.

Note : Results may vary as trials have been performed under lab setup.

Advantages :

With the use of our Modern Electromagnetic Heating Technology you can Improve the characteristic of the end product, Dissolution test exhibit good release profile, Reduce environmental problems, Reduction in unwanted side reaction, Pollution free, Purity in final product, Reduction in germ count, Destruction of Micro organism, Improved workplace environment - no radiated heat-loss, Chemical stability is unaffected by RF/microwave irradiation.

Technology options available :

For every specific target substance or Chemical, we provide different technological options to choose from. You can choose from Frequency (RF or Microwave), Batch type process (Replaces Tray Dryer).

Continuous conveyer dryer, Air / Hot air assisted drying, Vacuum assisted E-drying, Hybrid approach i.e. Used RF/MW technology in your pre-post stage of your existing plant.

Features :
  • Controls can be Custom built specific to your environment, target substances
  • Operation panel that is full of ease
  • Design that helps for safe and easy operation and maintenance
  • Minimized radio field leakage, made to international standards
  • Pre-programmable Timer on the display for added ease and to avoid losses due to excess heating

Unit : 1

4/5, Marudhar Industrial Estate, Panchal Road, Opp. Syndicate Bank, Bhayander (E), Mumbai-401105. (India)
+91(022) 48255071, 48255072
[email protected]
[email protected]

Unit : 2

Kerone Engineering Solutions LTD., Plot No. B-47, Addl. Midc Anandnagar, Ambernath (E), Dist. Thane (India)- 421506
+91(0251) 2620542/43/44/45/46
[email protected]
[email protected]
[email protected]

Unit : 3

Kerone Engineering Solutions LTD.,
Plot No. W-104, Addl. Midc Anandnagar, Ambernath (E), Dist. Thane (India)- 421506
+91(0251) 2620542/43/44/45/46
[email protected]
[email protected]

Unit : 4 (Europe)

Kerone Engineering Solutions LTD. (EMitech)
Viale della Palma, 7, 70033 Corato BA, Italy (Europe)

Australia & New Zealand (Office)

Linetech Pty Ltd:
Po Box 3046, Browns Plains, Qld 4118. Australia
Contact Person: Eric Quevauvilliers
+61 (0)418 871 005

Unit : 5 (Thailand)

Thailand Representative:
163 Rajapark Building, 18th floor, Sukhumvit 21 Road (Asoke), Wattana, Bangkok - 10110, Thailand
Contact Person: G.Vivekanand
+6689 500 9821

Bangladesh Representative:

House-39(6A)
Road-20, Block-J, Baridhara, Dhaka-1212, Bangladesh
Contact Person: Md. Emtiaz Morshed
+8801747762200

Subscribe

Get our products details in your Inbox