Composite materials are totally different established on their purpose: short-fibre reinforced thermoset plastics for large automobile body components, long-fibre reinforced thermoplastics for high-strength structural components, and woven roving’s for wind energy plants or filament windings for sleeves and pressure cylinders. They all have in common that they’re to be made within the most cost-effective method.
To fabricate these modern components, infrared heat or UV radiation are used because they quickly and homogeneously heat or cure them and in this way shorten process times.
Composites processing with Infrared Heat
Infrared heat cures thermosetting plastics and heats thermoplastics before welding, moulding or forming. Infrared radiation may be precisely adjusted to the product and the method. Advanced numerical methods like ray tracing and computational fluid dynamics facilitate produce the heating of huge surfaces homogenized.
Application examples:
- Curing of thermosetting plastics
- Heating of thermoplastics
- Joining of layers of composite materials
- Compacting of layers of composite materials
- Preheating of composite materials prior to forming
Drying and Curing with UV technology
UV radiation is employed to cure glass-fibre reinforced resins, unsaturated polyesters and vinyl esters. The ultraviolet technique is independent of moisture and temperature, consistent and well manageable. The curing within seconds is particularly advantageous for the production of products that are moulded, pultruded or wound.
Application examples:
- Boats
- Skylight panels
- Shower and tub enclosures
- Motor caravan and truck panels
- Masts and poles
- Tanks
- Pipes
Composites processing with Infrared Heat
Infrared heat cures thermosetting plastics and heats thermoplastics before welding, moulding or forming. Infrared radiation may be exactly adjusted to the product and the method. Advanced numerical ways like ray tracing and machine fluid dynamics help produce the heating of large surfaces homogeneous.
Application examples:
- Curing of thermosetting plastics
- Heating of thermoplastics
- Joining of layers of composite materials
- Compacting of layers of composite materials
- Preheating of composite materials prior to forming
Drying and Curing with UV technology
UV radiation is utilized to cure glass-fibre reinforced resins, unsaturated polyesters and vinyl esters. The UV technique is independent of moisture and temperature, consistent and well manageable. The curing among seconds is very advantageous for the production of products that are moulded, pultruded or wound.
Application examples:
- Boats
- Skylight panels
- Shower and tub enclosures
- Motor caravan and truck panels
- Masts and poles
- Tanks
- Pipes